May 18, 2010. Cannot get information for serial port. –>Initializing. Problem solved.it takes about 5-7 mins to detect modem.thats allits the same MTS Mblaze modem. Can you find out NORMAL USB(storage-device) can be accessed in ur UBUNTU-VM at ur windows-host?

Thousands of people are having troubles with those Huawei USB modems (assumption based in search engine results and forum posts). Below I present a list of steps to try out or hints to consider if you run into issues installing the drivers and/or software such as the error “the device has been disconnected or is unavailable”. I was using the but I guess the software/firmware related issue apply with other models, too. How to fix “the device has been disconnected or is unavailable” 1. Always log in with a user account that has local admin permissions. Once you’ve found an USB plug that works, always hook up the modem to the same plug.

If you see an error that “the device has been disconnected or is unavailable” when you try to connect, the following might help. The problem was that during installation Windows didn’t recognize the modem’s data interface. Hence, no modem was installed as far as Windows is concerned: • Go to My Computer → Properties → Hardware → Device Manager • Disconnect the USB modem.

• Right-click on each entry in Universal Serial Bus controllers and choose “uninstall”. • Restart the PC. • Re-connect the USB modem to the first USB plug. Windows will initialize the device, pay attention to all the messages it displays at the lower right bottom of your screen. The Sims Castaway Stories Download Full more.

It will most likely initialize the device as an USB mass storage device, a CD-ROM, etc. AND hopefully as a “Data Interface”. Zee Tv Hindi Serials Punar Vivah Song Download. If it never shows the mesage for data interface you have to try the device on the next USB plug.

• If Windows brings up an installation dialog for the data interface, allow it to get the drivers from the internet, but tell it to also check in Driver for suitable drivers (it might not find them otherwise). • If the Device Manager doesn’t list Huawei in the Modems and Ports section, you won’t be able to open a connection. Start all over with this guide 🙁.

I unlocked my modem but getting it to work using the mobile partner interface was a real pain especially with the device disconnected or unavailable message when clearly the device is working fine(I checked in the device manager and also in devices and printers), besides, the mobile partner can pick up the available networks so I was beaten!!!! I tried every thing you’ve suggested on this page to no avail. So I tried connecting using Dial-up and it worked like a dream.

So basically, I can set up my connections using mobe partner but can’t connect that way, I have to use the Dial-up. Funny enough, I can disconnect using the mobile partner. Will have to keep connecting thusly until it’s figured out.

I am using an HP ProBook 4530s •. Your method worked the second tome i tried it. All you need with a reliance netconnect Huawei modem is to connect the USB modem just when the machine is restarting. Then if the installation of the USB modem doesnt happen on its own, force install it by running the AutoRun.exe which is on the modem itself (go to my computer, and click on the usb drive where the reliance netconnect Huawai modem is connected) Thanks again.

I had this very same problem about two years ago and all that the SONY VAIO service centre had to offer was reinstall my OS (Win7 – 64 bit) •.

To set up a multirotor before you start flying, you have to hook it up to your computer to tweak settings in the flight controller’s configurator, whether it’s Betaflight, Cleanflight, Raceflight, or Kiss(or anything else for that matter). Sometimes, when you connect a board(such as one with Betaflight), the configurator will show you an error that says: “Failed to open serial port” The flight controller talks to your computer through a USB port, but it’s not a direct USB interface – instead, the software must be “tricked” into thinking it’s actually an old fashioned serial COM port. That’s just the way the chips on the flight controller can be read from and written to. The fix for this is fairly easy, you just need to download the. The drivers are available for Windows, Linux, and Mac, so you should be covered.

Simply install the drivers – it takes less than 2 minutes, and if prompted, restart your computer. Unplug your flight controller from the USB if it was plugged in. Close Chrome and the configurator, open them up again, plug in your flight controller, and when you click connect, it should now start working fine. To check that it’s working correctly, you can look at the drop down menu in the top right of the configurator and see which COM port the configurator is trying to connect through. You can see in the image below that in my computer, the default selection is “Bluetooth incoming port”, which is incorrect.