If you are mechanically inclined, install the new keyless entry system yourself. • Read the instructions. Not all models of keyless entry systems are the same, so be sure to read the instructions so you know the exact limits and specs of your system. • Disconnect your truck's battery. This is crucial and will prevent any electric discharge and possible shock later in the process. • Attach the keyless entry system to the underside of the dash.

Make sure it is securely fastened with zip ties. Also fasten any stray wires with zip ties to insure they won't come loose.

Be sure the system is placed where it will not interfere with other systems, such as air conditioning or breaks. • Consult your truck owner's manual to find which color wires control which door locking mechanisms. Once you have located these wires, solder them to the appropriate wires on your keyless entry system. Tape them with electrical tape to insure the wires stay together and maintain a connection. • The keyless entry system requires a constant power supply. One close source of power is the ignition switch wiring.

Locate this using your owner's manual and solder the red power wire from your entry system to the ignition switch.

Many modern vehicles come with remote keyless entry systems built directly into the car. For those that don't, or for older vehicles, however, you can have a remote keyless entry system installed. David Bustamante A Contracorriente Edicion Especial Descargar. This can be a great addition for people who want to improve the features in their car without having to upgrade. Now the system is installed and all the connections are secure to program the remote functions. You can program the ignition controlled door locks, the door unlocks pulse, ignition trigger feature, chirp mode, and the passive starter defeat. You can remote them as per your need. As trusted automotive outfitters, Alta Mere® Oklahoma City is your source for keyless entry installations. A keyless entry system makes locking and unlocking your vehicle remotely as easy as pressing a button, offering a level of ease and convenience that today's drivers need in their vehicles. Discover why Alta Mere.

Contents • • • • • • • Here are the steps to be followed: Identify your wiring system: Find out the wiring system of your vehicle before you opt for a Keyless Entry Installation. Get an access to the wires: You need to remove the panels that are underneath the dash and the steering column to get an access to the wires. Find out the location of the wiring harness and chop the black wires to have a complete look at the wires. The colour of the wire might be different depending upon the car and the keyless entry system. Prep Wires: If you aren’t using certain features like a trunk, chop the wires down to about six inches and tape them to the main harness with black electrical tape.

This will prevent them to be a hindrance during the installation. Connections: Slightly cut away a small amount of the covering on the wires in your vehicle’s wiring harness. Next, strip the ends of the wires in the keyless system. Now connect all the wires to the stripped area of the car wires.

Do not cut any existing wires of the car. Program the systems: Now the system is installed and all the connections are secure to program the remote functions. You can program the ignition controlled door locks, the door unlocks pulse, ignition trigger feature, chirp mode, and the passive starter defeat. You can remote them as per your need. You are done with Keyless Entry Installation. Quick fixes for keyless entry problems: If your battery is dead, you need to replace it with a new one. Check the polarity and insert the battery and seal it with the screws.

The door locks are controlled by the relays and if there is a problem with the relay, it is tricky to fix it. Purchase a 12-volt 30-amp relay. Use the screwdriver and remove the screws. Find out the wires and pull off the connectors from the fused relay. Replace it with the new relay at the right position. Thus, these simple tips will help you with Keyless Entry Installation and you do not have to hire any professionals. Pay complete attention while dealing with wires and you are sure to be successful in Keyless Entry Installation.