If you cannot get your cutter working, check that you've followed these steps carefully. 1) Turn your cutter off, and plug it into a free USB port on your computer. The new hardware wizard should appear, or if you've already done this, it should go 'Bing Bong' 2) On the cutter, Keep hitting 'Menu' until you see the setting for 'Baud.' The value should read 0.

Foison C24 Vinyl Cutter Driver Download. Master Pro Vinyl Sign Cutter Software for Plotters and Engravers. Master Pro is a dedicated software package offering a professional solution for all your vinyl sign making needs. Packed with tools and features to design and output everything from.

If it does not, use the arrow keys to make that so. Then, hit mode until you see normal screen FOISON. 3) Make a note of the Com port and set the flow control. To do this: Go to Start, and then Run. In the box enter: devmgmt.msc or right click 'my computer'--properties--device manager---ports.Then, hit OK.

4) Hit the plus sign next to 'Ports COM And LPT' 5) You should see 'USB Serial Adapter', Right click on this and go to 'Properties' 6) From there, select 'Port Settings'.Adjust the Boud Rate as per cutter setting. Set the flow control to 'X-ON/X-OFF' 7) Hit 'Advanced', Make a note of the Com Port, and if possible change it to something 1-4 if they're not in use. Download Fab 3000 V6 Keygen Software. Hit apply and OK to leave those menus. Close device manager. 9) Open Flexi, use the 'T' on the left hand side to type a couple of letters. 10) Go to File, then hit 'Cut/Plot' 11) This opens the Cut Plot screen.