The 82357B is built with High-Speed USB 2.0, providing a faster transfer rate with outstanding read performance. The 82357B is backward compatible with USB 1.1, which allows direct replacement of your 82357A with the updated 82357B driver installed. Before installing the driver, please ensure your PC meets the minimum system requirements with Microsoft® Windows® 2000/XP Professional and latest version of Keysight IO Libraries Suite 14.2 installed. To obtain the driver for 82357B, click on the link and save the file to any location on your hard disk. Double-click on the 82357B_setup.exe file to run the installer.

Follow the instructions on the screen to install the driver. Once the driver installation has completed, your 82357B will be working successfully! Microsoft and Windows are U.S. Registered trademarks of Microsoft Corporation.

Hello, I have a NEFF 470 with an HPIB interface. I'm trying to retrofit with a USB/GPIB adapter. I have an Agilent 82357B and have gone through the steps to enable a side-by-side VISA installation, i.e. Enabling the tulip dll in MAX and 488.2 in The Keysight Connection Expert software. The device shows up in MAX.

This is the first USB-GPIB interface I've tried to use. Futura Std Condensed Extra Bold Oblique Free Download. Previously, I'd used National Ins't PCI cards. Telecharger American Dad Saison 8 Vf 1fichier. Had trouble getting it to work and figured I was screwing up something on the driver side. Eventually, I gave up and bought an Agilent (Keysight) PCI-GPIB card and got that working without problems. Went back to try and get the. Powered via USB port. Compatible with IEE488.1/488.2, SICL and VISA 2.2. Use up to four 82357Bs on each computer or laptop. Supports Windows 2000, XP, Vista and Windows 7. Drivers for C/C++, VB, Visual Studio 6.0, VEE and Labview.

I have also located a driver listed as plug and play here: All of the commands used in the library, however, are GPIB, and none seem to work -- even simple clear commands. I have read somewhere that these GPIB commands are incompatible with the Agilent GPIB/USB VISA and that I will need to use an NI adapter. This I can deal with, as long as I know this is the issue, i.e. Before spending $600 on another adapter. I have also tried using raw serial VISA read/write commands, which seem to work. I am not sure I can translate the entire library (or what I need of it) from GPIB commands to VISA, but if this would work I am also open to that. Thanks, Colin.